Product Details:
Size/Diameter | 10mm |
Material | Mild Steel |
Usage/Application | Industrial |
Length | 6 meter |
Material Grade | Inconel 600 |
Country of Origin | Made in India |
Inconel600 is a nickel-chromium-iron alloy with good oxidation resistance at high temperatures and resistance to chloride-ion stress corrosion cracking corrosion by high-purity water, and caustic corrosion. Alloy 600 also has excellent mechanical properties and has a desirable combination of high strength and good workability. Used for furnace components, in chemical and food processing, in nuclear engineering and for the sparking electrodes.
Chemical Composition Limits | ||||||||
Weight% | C | S | Cr | Cu | Mn | Si | Ni | Fe |
Nickel Alloy 600 | 0.15 max | 0.015 max | 14.0 - 17.0 | 0.50 max | 1.0 max | 0.50 max | 72.0 min | 6 - 10 |
Material | Form and Condition | Tensile Strength | Yield Strength | Elongation % | Hardness, Rockwell | ||
ksi | MPa | ksi | MPa | ||||
Alloy 600 rod and bar | Cold drawn Annealed | 80-100 | 550-690 | 25-50 | 170-345 | 55-35 | 65-85B |
Alloy 600 Plate | Hot rolled Annealed | 80-100 | 550-725 | 30-50 | 205-345 | 55-35 | 65-85B |
Alloy 600 Sheet | Cold Rolled Annealed | 80-100 | 550-690 | 30-45 | 205-310 | 55-35 | 88B max |
Alloy 600 Tube and Pipe | Cold Drawn Annealed | 80-100 | 550-690 | 25-50 | 170-345 | 55-35 | 88B max |
Alloy 600 Wire | Cold Drawn Annealed | 80-120 | 550-830 | 35-75 | 240-520 | 45-20 | - |
Alloy 600 Wire | Cold Drawn No 1 Temper | 105-135 | 725-930 | 70-105 | 480-725 | 35-15 | - |
Alloy 600 Wire | Spring Temper | 170-220 | 1170-1520 | 150-210 | 1035-1450 | 5-2 | - |
Product Details:
Size/Diameter | 10mm |
Material | Mild Steel |
Usage/Application | Industrial |
Length | 6 meter |
Material Grade | Inconel 600 |
Country of Origin | Made in India |
Inconel 601 (UNS N06601) is a Nickel-Chromium alloy with an addition of Aluminium for outstanding resistance to oxidation and other forms of high temperature corrosion. Alloy 601 also has high mechanical properties at elevated temperatures. Alloy 601 is used for industrial furnaces, radiant tubes, themocouple tubes and heat treatment equipment, baskets, muffles, retorts. Petrochemical process equipment and aircraft components.
Chemical Composition Limits | |||||||||
Weight% | Ni | Cr | Fe | Al | C | Mn | S | Si | C |
Alloy 601 | 58-63 | 21-25 | Rem | 1-1.7 | 0.10 max | 1.0 max | 0.015 max | 0.50 max | 1.0 max |
Material | Form and Condition | Tensile Strength | Yield Strength | Elongation % | Hardness, HB | ||
ksi | MPa | ksi | MPa | ||||
Alloy 601 Bar | Bar Annealed | 80-115 | 550-790 | 30-60 | 205-415 | 70-40 | 60-80 |
Alloy 601 Sheet | Sheet Annealed | 85-100 | 585-690 | 30-50 | 205-345 | 55-35 | 65-80 |
Alloy 601 Plate | Plate Annealed | 80-100 | 550-690 | 30-45 | 205-310 | 65-45 | 60-75 |
Availability
Alloy 601 is available in Pipe, Tube, Round Bar, Bar, Sheet, Plate, Strip and Forging Stock. Contact Sales for further availability.
Product Details:
Length | 6 meter |
Material | Mild Steel |
Usage/Application | Industrial |
Type | Inconel 625 Round Bars |
Country of Origin | Made in India |
Inconel 625 (UNS N06625) is a nickel-chromium-molybdenum alloy with an addition of niobium. The addition of molybdenum acts with the niobium to stiffen the alloy matrix, providing a high strength without a strengthening heat treatment. The alloy resists a wide range of corrosive environments and has a good resistance to pitting and crevice corrosion. Alloy 625 is used in chemical processing, aerospace and marine engineering oil & gas, pollution control equipment and nuclear reactors.
Chemical Composition Limits | |||||||||||||
Weight % | Ni | Cr | Mo | Nb + Ta | Fe | Ti | C | Mn | Si | S | P | Al | Co |
Alloy 625 | 58.0 min | 20 - 23 | 8 -10 | 3.15 -4.15 | 5.0 max | 0.40 max | 0.10 max | 0.50 max | 0.50 max | 0.15 max | 0.15 max | 0.40 max | 1.0 max |
Material | Form and Condition | Tensile Strength MPa | Yield Strength (0.2% Offset) MPa | Elongation 4D(%) | Hardness HB | ||
Ksi | MPa | Ksi | MPa | ||||
Alloy 625 Bar | Annealed | 120 | 827 | 60 | 414 | 30 | ≤ 287 HB |
Alloy 625 Sheet | Annealed | 120 | 827 | 60 | 414 | 30 | 145-240 |
Alloy 625 Tube Seamless and Welded |
Annealed | 120 | 827 | 60 | 414 | 35 | - |
Availability
Alloy 625 (UNS N06625) is available in Round Bar, Flat Bar, Extruded section, Pipe, Tube, Plate, Sheet, Strip, Plate, Hexagon, Forging Stock, Extruded Section, Wire and Powder. View Stock List, Plate Stock List or contact Sales for further availability.
Product Details:
Size/Diameter | 10mm |
Material | Mild Steel |
Length | 6 meter |
Usage/Application | Industrial |
Material Grade | Inconel 718 |
Country of Origin | Made in India |
Inconel 718 (UNS N07718, W Nr 2.4668) is an austenitic nickel-based superalloy. Alloy 718 exhibits excellent high yield tensile and creep-rupture properties at temperatures up to 1300ºF and oxidation resistance to 1800ºF. Alloy 718 is used in applications that require high strength such as parts for jet engines and high speed airframe parts such as wheels, buckets, spacers and high temperature bolts and fasteners.
Chemical Composition Limits | ||||||||||||||||
Weight % | C | Mn | P | S | Si | Cr | Ni | Mo | Cb | Ta | Ti | Al | Co | B | Cu | Fe |
Alloy 718 AMS 5662 |
0.08 | 0.35 | 0.015 | 0.015 | 0.35 | 17-21 | 50-55 | 2.8-3.30 | 4.75-5.50 | 0.05 | 0.65-1.15 | 0.20-0.80 | 1.00 | 0.006 | 0.30 | Rem |
There are two main types of solution annealed and aging treatments:
1)
Solution Treatment (AMS 5662 Bar / AMS 5596 Sheet): 1725°F - 1850°F + Air Cool.
Heat Treatment (AMS 5663 Bar) : 1325°F for 8 hrs, cooling 100°F/hr to 1150°F, hold at 1150°F for 8hrs min, + Air Cool .
This treatment gives the highest room temperature tensile and yield strengths as well as producing the highest fatigue strength. It is the optimum heat treatment for Alloy 718 where a combination of rupture life, notch rupture life and rupture ductility is required.
2)
Alternative Solution Treatment (AMS 5664 Bar / AMS 5597 Sheet): 1900°F - 1950°F + Air Cool
Heat Treatment: 1400°F for 10hrs, furnace cool to 1200°F, hold at 1200°F for a total aging time of 20 hrs + Air Cool.
This is the prefered treatment in tensile-limited applications as it produces the best transverse ductility in heavy sections, impact strength and low temperature notch tensile strength. However, this treatment has a tendency to produce notch brittleness in stress rupture.
Product Details:
Size/Diameter | 10mm |
Material | Mild Steel |
Usage/Application | Industrial |
Length | 6 meter |
Material Grade | Inconel 718 |
Country of Origin | Made in India |
Inconel 800HT - The 800 series of alloy are nickel-iron-chromium superalloys that have excellent properties of high temperature strength and resistance to oxidation, carburization and other types of high temperature corrosion. Alloy 800, 800H and 800HT are used in various applications from furnace components, petrochemical furnace cracker tubes to sheathing for electrical heating elements.
Chemical Composition Limits | |||||||
Weight % | Ni | Cr | Fe | C | Al | Ti | Al+Ti |
Alloy 800 | 30-35 | 19-23 | 39.5 min | 0.10 max | 0.15-0.60 | 0.15-0.60 | 0.30-1.20 |
Alloy 800H | 30-35 | 19-23 | 39.5 | 0.05-0.10 | 0.15-0.60 | 0.15-0.60 | 0.30-1.20 |
Alloy 800HT | 30-35 | 19-23 | 39.5 | 0.06-0.10 | 0.25-0.60 | 0.25-0.60 | 0.85-1.20 |
Product Details:
Size/Diameter | 20mm |
Material | Mild Steel |
Usage/Application | Industrial |
Length | 18 meter |
Material Grade | Inconel 718 |
Country of Origin | Made in India |
The UNS N08825 Square Bar is known for its resistance against localized and general corrosion in a wide range of environments. The excellent mechanical properties of Din 2.4858 Flat Bar make it appealing for different industries like nuclear fuel processing, pollution control, acid production, etc. The 825 Incoloy Hex Bar is also used in making equipment that handles radioactive waste. Our ASME SB425 UNS N08825 Square Bar goes through several quality and safety checks in government-approved labs conducted by third parties before they are delivered.
As a renowned Inco 825 Alloy Forged Bar manufacturer, we offer tested products and can conclude that they have similar applications as that of the Incoloy alloy 020. Clients searching for high-quality Inconel Alloy 825 bright bar at competitive prices can contact us. We offer full customization on the specific requirements given by our esteemed clients. We follow the standard shipping process and offer fast deliveries of ASTM B425 UNS N08825 Bar. Our products are dimensionally accurate, and they are made to cater to the particular requirements of our clients.
Product Details:
Size/Diameter | 10mm |
Material | Stainless Steel |
Usage/Application | Industrial |
Length | 6 meter |
Material Grade | Inconel 600 |
Country of Origin | Made in India |
Inconel 800H - The 800 series of alloy are nickel-iron-chromium superalloys that have excellent properties of high temperature strength and resistance to oxidation, carburization and other types of high temperature corrosion. Alloy 800, 800H and 800HT are used in various applications from furnace components, petrochemical furnace cracker tubes to sheathing for electrical heating elements.
Chemical Composition Limits | |||||||
Weight % | Ni | Cr | Fe | C | Al | Ti | Al+Ti |
Alloy 800 | 30-35 | 19-23 | 39.5 min | 0.10 max | 0.15-0.60 | 0.15-0.60 | 0.30-1.20 |
Alloy 800H | 30-35 | 19-23 | 39.5 | 0.05-0.10 | 0.15-0.60 | 0.15-0.60 | 0.30-1.20 |
Alloy 800HT | 30-35 | 19-23 | 39.5 | 0.06-0.10 | 0.25-0.60 | 0.25-0.60 | 0.85-1.20 |
Product Details:
Minimum Order Quantity | 100 Kg |
Thickness | 4 inch |
Diameter | 21 mm |
Material | Stainless Steel |
Usage/Application | Industrial |
Surface Finish | Black |
Single Piece Length | 6 meter |
Minimum Order Quantity | 100 |
Standard | STAINLESS STEEL |
Surface Treatment | Annealed |
Ultimate Tensile Strength (UTS) | 4 |
Country of Origin | Made in India |
Additional Information:
Product Details:
Size/Diameter | 10mm |
Material | Mild Steel |
Usage/Application | Industrial |
Length | 6 meter |
Material Grade | Inconel 625 |
Country of Origin | Made in India |
Inconel 800 - The 800 series of alloy are nickel-iron-chromium superalloys that have excellent properties of high temperature strength and resistance to oxidation, carburization and other types of high temperature corrosion. Alloy 800, 800H and 800HT are used in various applications from furnace components, petrochemical furnace cracker tubes to sheathing for electrical heating elements.
Chemical Composition Limits | |||||||
Weight % | Ni | Cr | Fe | C | Al | Ti | Al+Ti |
Alloy 800 | 30-35 | 19-23 | 39.5 min | 0.10 max | 0.15-0.60 | 0.15-0.60 | 0.30-1.20 |
Alloy 800H | 30-35 | 19-23 | 39.5 | 0.05-0.10 | 0.15-0.60 | 0.15-0.60 | 0.30-1.20 |
Alloy 800HT | 30-35 | 19-23 | 39.5 | 0.06-0.10 | 0.25-0.60 | 0.25-0.60 | 0.85-1.20 |